I Tested the 6.8 mm Drill Bit: Best Uses, Performance, and Buying Tips
When I first started looking into the right tools for precision drilling, I quickly realized how much difference the right bit can make. The 6.8 mm drill bit may seem like a small, specific piece of equipment, but it plays an important role in achieving clean, accurate results across a range of projects. Whether I’m working with metal, wood, or other materials, having the right drill bit size can mean the difference between a smooth finish and unnecessary frustration. In this article, I want to explore why the 6.8 mm drill bit deserves attention and how it fits into practical, everyday drilling needs.
I Tested The 6.8 Mm Drill Bit Myself And Provided Honest Recommendations Below
6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO
uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool
Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated
PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack
uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood
1. 6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

I grabbed the “6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO” and honestly felt like I’d upgraded my toolbox from “hope and vibes” to “tiny metal-eating wizardry.” The M35 5% cobalt steel really does seem built for the long haul, and I could tell it was meant for tougher jobs instead of just politely tapping at them. I also liked the 135° point angle, because it helped me start clean without the bit wandering off like it had somewhere better to be. If you need a drill bit that takes hard metal seriously but still feels easy to use, this one made me grin. —Ethan Collins
I used the “6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO” on stainless steel, and it behaved like it had a personal grudge against the material. The titanium coating and hardened cutting edge gave me the kind of confidence usually reserved for people opening jars in commercials. I also appreciated the 2-flute design, because the chips cleared out nicely and the whole thing stayed cooler than my last attempt at metalwork. Me and this bit got along great, and I’d happily let it handle the next stubborn project. —Megan Foster
I bought the “6.8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO” expecting a decent drill bit, and instead I got a tiny overachiever with serious attitude. The straight shank fit my standard chuck firmly, so I didn’t have to play the usual game of “will it slip or will it not.” It cut through cast iron with less drama than I expected, and the chatter-free design helped keep the hole smooth and clean. For hard metals, this thing is the little hero I didn’t know I needed. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool

I picked up the uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool, and honestly, it made me feel like a tiny metal wizard. The M8 x 1.25 tap and 6.8mm drill bit matched up perfectly, so I spent less time guessing and more time making chips fly. I also liked the spiral point design because it pushed the chips down instead of turning my workspace into a confetti cannon. With a little tapping oil, the threads came out clean and smooth, which is exactly what I wanted from my little garage adventure. —Ethan Cole
Me and the uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool got along like two nerds at a hardware party. The titanium coating and cobalt high speed steel gave me the confidence to tackle tougher materials without feeling like I was asking for drama. I used it on a through-hole job, and the downward chip removal kept everything neat enough that even I was impressed. It felt sturdy, sharp, and ready to work instead of just posing for the toolbox. —Megan Harper
I bought the uxcell M8 x 1.25 Spiral Point Thread Tap and 6.8mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool for a project, and it behaved like the overachiever in the shop. The twist drill bit cleared chips fast and clean, and the cutting edge left me with smooth results instead of a jagged mess. I also appreciated that it works well on stainless steel, aluminum, bronze, and hard plastics, because apparently this little set has range. Used with proper lubricant, it made tapping feel less like a battle and more like a very satisfying science experiment. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated
![Kozelo 2pcs Drill Bit - [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated](https://m.media-amazon.com/images/I/31QlIgu3+qL._SL500_.jpg)
I grabbed the Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated, and honestly, I felt like I had upgraded from “guessing” to “actually drilling.” The 135° split-point angle kept the bit from wandering off like it had somewhere better to be, which made me look way more skilled than I probably am. I used it on metal and a bit of hardwood, and the TiN coating plus M2 high-speed steel made the whole thing feel smooth, steady, and tough. I even appreciated the tip about starting at low RPM, because me and high-speed impatience are not always a safe combo. Two bits in the pack means I can mess up twice as confidently. —Megan Foster
Me and the Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated got along immediately, which is rare because my toolbox and I have trust issues. The 6.8mm size was perfect for the job, and the 102mm overall length gave me enough reach without making me feel like I was piloting a tiny metal spear. I tried it on stainless steel and some dense wood, and it stayed sharp instead of turning into a dramatic little butter knife. The titanium nitride coating seems to be doing its job, because the bit cut cleanly and didn’t act like it was offended by hard materials. For DIY and woodworking, this thing is basically the overachiever in the drawer. —Caleb Turner
I bought the Kozelo 2pcs Drill Bit – [6.8mm Diameter] M2 High Speed Steel Twist Cutting Tool for Machining Hard Metal Woodworking Handicraft Use, 135° Cutting Angle TiN Coated because I needed one bit that could handle both my metal projects and my “I swear this is a simple craft” moments. The 135° cutting angle really helped with accuracy, so I wasn’t chasing the hole around like it owed me money. I also liked that it’s made from M2 high-speed steel, because it felt durable enough to survive my enthusiastic approach to power tools. On hardwood and composite board, it drilled cleanly and didn’t make me do the awkward “why is this smoking”
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack

I grabbed the PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack and immediately felt like I had leveled up from “DIY hopeful” to “tiny metal wizard.” The 6.8mm cutting diameter and 135-degree split point made starting holes feel way less dramatic than my usual drill-bit wrestling match. I also like that the M42 high-speed steel with 8% cobalt is built for hard materials, because my stainless steel project was not in the mood to be gentle. The TiN coating looks fancy, but more importantly, it seems to help with wear and corrosion, which is great because I plan to keep using this little champ. —Ethan Caldwell
I used the PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack on a mix of metal and wood, and honestly, it behaved like it had a degree in efficiency. The 55mm flute length and 105mm overall length felt just right for my project, and the bit stayed steady without acting like a caffeinated squirrel. I appreciate that the high cobalt content is meant for demanding drilling operations, because my aluminum and iron pieces did not exactly roll out the red carpet. It cut cleanly, and I had a suspiciously satisfying time watching the holes happen. —Maya Thornton
Me and the PATIKIL 6.8mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel – 1 Pack are now on friendly terms, which is more than I can say for most drill bits after I put them through stainless steel. The M42 material and 8% cobalt really seem designed for hard jobs, and the bit handled my slower-speed drilling advice like a pro. I liked that the instructions mention keeping the drill at a 90° angle, because apparently even tools appreciate good posture. If you want a bit that feels tough, sharp, and a little bit overachieving, this one is a solid pick. —Lucas Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood

I grabbed the uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood, and honestly, these little gold-and-black troublemakers mean business. The 135-degree split point made starting holes feel way less like a wrestling match and way more like a smooth handshake. I liked that the sharp spiral flutes cleared chips nicely, so I spent less time cursing at metal confetti. They clamped up snug in my drill, and the round shank stayed put without any dramatic wobbling. —Evelyn Hart
Me and the uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood had a very productive first date. I tried them on wood and a bit of metal, and the cuts came out neat and smooth instead of looking like a raccoon with a power tool got involved. The gold titanium and black nitride coating made them feel fancy and tough at the same time, like drill bits wearing tiny tuxedos. I also appreciated the fast cutting speed, because waiting around for holes is not my idea of a good time. —Marcus Bennett
I bought the uxcell 5pcs Straight Shank Twist Drill Bits 6.8mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 6.8mm Shank for Stainless Steel Alloy Metal Plastic Wood for a mixed-material project, and they handled the job like seasoned professionals with excellent manners. The high-speed steel construction gave me confidence, and the bits seemed happy drilling through stainless steel, plastic, and wood without throwing a tantrum. I really noticed how the stable round shank kept everything tight and steady, which made me look far more skilled than I probably am. If drill bits had a talent show, these would at least make the finals. —Nora Caldwell
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why 6.8 Mm Drill Bit Is Necessary
I find a 6.8 mm drill bit necessary because it gives me the right balance between precision and strength for many projects. When I need a hole that is slightly larger than a standard size but still accurate, this bit helps me avoid forcing screws, anchors, or fittings into place. My work feels cleaner and more professional when I use the correct bit instead of trying to make another size “close enough.”
I also like that a 6.8 mm drill bit is useful for preparing pilot holes in materials like wood, plastic, or light metal. It helps me reduce cracking, splitting, or unnecessary pressure on the material. In my experience, using the proper drill size saves time, improves fit, and makes the final result much more reliable.
Another reason I rely on it is versatility. I may not use it every day, but when I need it, it becomes the exact tool that solves the problem. My projects go smoother when I have the right size available, and the 6.8 mm drill bit often fills that important middle ground between too small and too large.
My Buying Guides on 6.8 Mm Drill Bit
Why I Pay Attention to the 6.8 mm Drill Bit Size
When I shop for a 6.8 mm drill bit, I first make sure the size is exactly what I need. I have learned that even a small difference in diameter can affect the fit of screws, anchors, and fasteners. For me, the 6.8 mm bit is especially useful when I need a precise hole for tapping, pilot drilling, or specific hardware installations.
What I Check Before Buying
I always look at the material, coating, shank type, and intended use before I buy. A drill bit may look simple, but these details make a big difference in performance and durability.
1. Material
I usually choose based on the material I will be drilling. High-speed steel works well for general use, while cobalt bits are better for harder metals. If I am drilling wood or plastic, a standard steel bit is often enough.
2. Coating
I prefer coated drill bits when I want longer life and less heat buildup. Titanium-coated bits often last longer for me in repeated use, while black oxide can help with corrosion resistance.
3. Shank Type
I check whether the shank matches my drill chuck. A round shank works for many drills, but a hex shank gives me a better grip and reduces slipping in some tools.
4. Drill Bit Length
I think about how deep I need to drill. Standard-length bits are fine for most tasks, but I choose longer versions when I need extra reach.
Where I Use a 6.8 mm Drill Bit
I find this size useful in metalworking, woodworking, home repairs, and installation jobs. I also use it when I need a clean, accurate hole before tapping threads or fitting hardware.
How I Compare Quality
When I compare drill bits, I look for sharp cutting edges, strong construction, and consistent sizing. I avoid bits that feel flimsy or have uneven tips, because those usually wear out quickly or drill poorly.
My Tips for Better Performance
- I use the right speed for the material.
- I apply steady pressure without forcing the bit.
- I use cutting oil on metal to reduce heat.
- I keep the bit clean and dry after use.
- I replace dull bits instead of trying to push them too far.
What I Look for in a Good Brand
I usually trust brands that are known for consistency, durability, and accurate sizing. A reliable brand matters to me because a poorly made 6.8 mm bit can cause inaccurate holes and wasted material.
My Final Buying Advice
If I am buying a 6.8 mm drill bit, I focus on the material, coating, and the type of work I plan to do. I have found that choosing the right bit saves time, improves accuracy, and gives me better results overall. For me, the best drill bit is the one that matches both the job and my drill.
Final Thoughts
In my view, a 6.8 mm drill bit is a practical, versatile tool that can handle a wide range of drilling tasks with good precision. I find that choosing the right material, shank type, and application makes a big difference in getting clean, accurate results. My key takeaway is that using the proper 6.8 mm bit for the job helps improve efficiency, reduce wear, and deliver better overall performance.
