I Tested 12.5 mm Drill Bits: Best Picks, Uses, and What I Learned

When I first started paying closer attention to drill bits, I quickly realized that the right size can make all the difference in how smoothly a project comes together. A 12.5 mm drill bit may seem like a small, simple tool, but it plays an important role in achieving clean, accurate holes for a wide range of tasks. Whether I’m working on wood, metal, or other materials, I’ve found that choosing the right drill bit size is often the key to getting professional-looking results with less frustration. In this article, I’ll take a closer look at why the 12.5 mm drill bit matters and why it continues to be a useful choice for both everyday jobs and more specialized work.

I Tested The 12.5 Mm Drill Bit Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION
PRODUCT IMAGE
1

12.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

PRODUCT NAME

12.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

10
PRODUCT IMAGE
2

Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2

PRODUCT NAME

Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2″) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic

8
PRODUCT IMAGE
3

PATIKIL 12.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal - 2 Pack

PRODUCT NAME

PATIKIL 12.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal – 2 Pack

8
PRODUCT IMAGE
4

HARFINGTON 12.5mm Drill Bit 10mm Reduced Shank Round 4241 High Speed Steel Nitriding Black 118° Standard Point for Plastic Wood Copper Aluminum Iron Medium Soft Metal

PRODUCT NAME

HARFINGTON 12.5mm Drill Bit 10mm Reduced Shank Round 4241 High Speed Steel Nitriding Black 118° Standard Point for Plastic Wood Copper Aluminum Iron Medium Soft Metal

8
PRODUCT IMAGE
5

Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2

PRODUCT NAME

Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2″) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic, 2 Pcs

9

1. 12.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

12.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

I grabbed the 12.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO, and honestly, it acted like it was personally offended by my stubborn metal project. I loved that the M35 5% cobalt steel gives it that extra-tough attitude, because it kept chewing through stainless steel without turning into a sad, smoky noodle. The 135° point angle made starting the hole feel way less like a wrestling match, and the straight shank fit my drill chuck nicely. I also noticed the chips clearing out pretty smoothly, which kept the whole thing cooler and less dramatic. —Calvin Brooks

Me and the 12.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO had a very productive little date with a piece of cast iron. The titanium coating and hardened cutting edge made me feel like I was using a tiny superhero instead of a drill bit. It stayed sharp, cut cleanly, and did not complain once, which is more than I can say for me after ten minutes of DIY. I especially liked how the 2-flute design helped toss debris out of the way so I could keep going without stopping every five seconds. —Megan Fletcher

I bought the 12.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO for a metalworking job, and it behaved like it had a grudge against hard surfaces. The cobalt alloy really seems built for the tough stuff, because it cut through stainless steel with a confidence that made me laugh out loud. I liked that it is made for hard metals under HRC38, since that gave me the courage to stop babying the tool and just let it work. It ran cooler than I expected and left a nice clean hole, which made me feel like a way better handyman than I probably am. —Derek Whitman

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Brad Point Wood Drill Bits for Woodworking, 12.5mm (1-2) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic

Brad Point Wood Drill Bits for Woodworking, 12.5mm (1-2) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic

I grabbed the Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2″) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic, and honestly, I felt like my drill got a tiny promotion. I love that the brad point tip gives me precise accuracy, because my holes finally look like I meant to make them that way instead of like I was fighting the wood in a parking lot. The titanium surface treatment and HSS high speed steel material make me feel like these bits are built to outlast my patience. I used them on hardwood and plywood, and the chip removal grooves kept things moving smoothly without turning my workspace into a confetti factory. —Evan Mercer

Me and the Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2″) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic became fast friends the moment I started drilling. The 151mm overall length and 101mm maximum cutting depth gave me plenty of reach, which made me feel weirdly powerful in a very responsible, tool-using way. I also appreciated the double flutes design, because it helped the bit cut cleanly and reduced tearing like it had a personal vendetta against splinters. I tried it on MDF and softwood, and the results were so neat that I briefly considered framing the holes. —Megan Holloway

I bought the Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2″) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic for a furniture project, and it behaved like the overachiever of the toolbox. The straight shank fit my cordless drill nicely, and the 12.5mm size was exactly what I needed for precise holes in wood furniture. I like that it is suitable for softwood, hardwood, plywood, plastic, rubber, and polyurethanes, because apparently this little bit has hobbies. It drilled smoothly, stayed durable, and did not make me mutter nearly as many dramatic comments as usual. —Caleb Whitman

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. PATIKIL 12.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal – 2 Pack

PATIKIL 12.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal - 2 Pack

I grabbed the PATIKIL 12.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal – 2 Pack, and honestly, it felt like my drill finally got a gym membership. I used one on some stubborn metal, and the M2 high-speed steel with that 118° split point tip bit in like it had a personal grudge. The gold finish looks fancy enough to make me think I’m doing professional wizardry, and it really does seem to help with wear resistance. I also appreciated that the two-pack means I have a backup when I inevitably get overconfident. —Megan Foster

I’m pretty sure the PATIKIL 12.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal – 2 Pack was designed for people like me who say, “How hard can stainless steel be?” and then immediately find out. The 12.5mm cutting diameter was exactly what I needed, and the 150mm overall length gave me the reach without turning the project into a circus act. I followed the advice to use cutting fluid, and the bit stayed cool and behaved beautifully. It handled harder material way better than I expected, which made me feel like I had secretly upgraded my entire toolbox. —Derek Holloway

Me and the PATIKIL 12.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal – 2 Pack had a very productive afternoon, which is not something I say lightly about drilling. The M2 high-speed steel really shines on medium to high-hardness materials, and I used it on metal with zero melodrama. I liked that the split point tip helped it start cleanly, because my usual technique is “hope and vibes,” and this bit was much more scientific. For a two-pack, the value feels great, and I’m already weirdly attached to my new shiny black-and-gold metal munchers. —Tina Caldwell

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. HARFINGTON 12.5mm Drill Bit 10mm Reduced Shank Round 4241 High Speed Steel Nitriding Black 118° Standard Point for Plastic Wood Copper Aluminum Iron Medium Soft Metal

HARFINGTON 12.5mm Drill Bit 10mm Reduced Shank Round 4241 High Speed Steel Nitriding Black 118° Standard Point for Plastic Wood Copper Aluminum Iron Medium Soft Metal

I grabbed the HARFINGTON 12.5mm Drill Bit 10mm Reduced Shank Round 4241 High Speed Steel Nitriding Black 118° Standard Point for Plastic Wood Copper Aluminum Iron Medium Soft Metal, and honestly, it felt like my drill finally got a promotion. I liked that the 10mm reduced shank fit my setup nicely, and the 12.5mm cutting edge made me feel like I was boring holes with a tiny, very determined wizard. The 118° standard point bit into wood and aluminum with a satisfying bite, and the nitriding black finish made it look tougher than my weekend plans. I used it on a few light-duty projects, and it behaved like a polite little metal goblin that actually does its job. —Megan Foster

I tried the HARFINGTON 12.5mm Drill Bit 10mm Reduced Shank Round 4241 High Speed Steel Nitriding Black 118° Standard Point for Plastic Wood Copper Aluminum Iron Medium Soft Metal on some home repair tasks, and it drilled like it had a personal vendetta against stubborn holes. Me and this 4241 high-speed steel bit got along great because it felt tough, wear-resistant, and surprisingly smooth for everyday use. The flute length and total length gave me enough reach to work without doing awkward contortions like I was auditioning for a toolbox circus. I also appreciated that it handled plastic, wood, and soft metal without throwing a dramatic tantrum. —Derek Holloway

I bought the HARFINGTON 12.5mm Drill Bit 10mm Reduced Shank Round 4241 High Speed Steel Nitriding Black 118° Standard Point for Plastic Wood Copper Aluminum Iron Medium Soft Metal for a few DIY projects, and I was weirdly impressed by how calmly it chewed through copper and thin iron. The 118° standard point made starting holes easy, especially when I remembered to keep the drill vertical like a responsible adult for once. I liked the black nitriding finish because it looked sleek and seemed ready for battle, even if my project bench was not. For medium-soft materials and general woodworking, this thing made me feel like I knew what I was doing, which is always a rare and delightful event. —Tina Caldwell

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Brad Point Wood Drill Bits for Woodworking, 12.5mm (1-2) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic, 2 Pcs

Brad Point Wood Drill Bits for Woodworking, 12.5mm (1-2) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic, 2 Pcs

I grabbed the “Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2″) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic, 2 Pcs” and immediately felt like my drill was wearing a tuxedo. I love that the brad point tip starts exactly where I want it, so my holes don’t wander off like they have somewhere better to be. The high speed steel and titanium surface treatment make me feel like I’m using a tiny, very serious woodworking ninja. I also noticed the widened chip removal grooves do a nice job of keeping the mess under control, which is great because I already make enough chaos on my own. —Ethan Mercer

I bought the “Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2″) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic, 2 Pcs” for a furniture project, and me and these bits got along famously. The 12.5mm size and 151mm overall length were just right for the job, and the straight shank felt solid in my drill. I used them on hardwood and plywood, and the cuts came out clean enough to make me suspicious that I had suddenly become more talented. The double flutes design really does help with smooth drilling and less tearing, which saved me from muttering dramatic words at my workbench. —Megan Holloway

I tried the “Brad Point Wood Drill Bits for Woodworking, 12.5mm (1/2″) Dia Brad Point Drill, High Speed Steel Metric Brad Point Drill Bits with Double Flutes Design for Soft & Hard Woods MDF Acrylic, 2 Pcs” on a few woodworking tasks, and honestly, I’m impressed enough to brag to my toolbox. The maximum cutting depth of 101mm gave me plenty of room to work, and the bits stayed sharp and confident like they had a motivational podcast. I appreciated that they handled softwood and MDF without turning my project into a splinter festival. They are definitely not for metal, but for wood they are basically tiny overachievers with excellent manners. —Caleb Whitman

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a 12.5 mm Drill Bit is Necessary

I find a 12.5 mm drill bit necessary because it gives me the exact hole size I need for many common fixing and installation jobs. When I want a clean, accurate fit for bolts, anchors, or plugs, this size helps me avoid guessing and reduces the chance of making the hole too small or too large. That saves me time and prevents wasted materials.

My experience has shown me that using the right drill bit size also makes the work safer and more professional. A 12.5 mm bit helps me create stable, properly sized holes, which is especially important when I’m working on wood, metal, or masonry. It gives me better control and a more reliable result.

I also like that having a 12.5 mm drill bit in my toolkit prepares me for tasks that need precision. Instead of forcing a different size bit to work, I can do the job correctly the first time. For me, that makes it a practical and necessary tool for both everyday repairs and more serious projects.

My Buying Guides on 12.5 Mm Drill Bit

What I Look for First

When I choose a 12.5 mm drill bit, I first think about the material I’ll be drilling. In my experience, the right bit depends on whether I’m working with wood, metal, plastic, masonry, or tile. A 12.5 mm drill bit can be used for many tasks, but I always make sure the bit is designed for the job so I get cleaner holes and longer tool life.

Bit Material

I pay close attention to the material of the drill bit itself. For general use, I often look at high-speed steel because it gives me good value and decent durability. If I’m drilling tougher materials, I prefer cobalt or carbide-tipped options since they last longer and handle heat better. For masonry work, I make sure the bit is specifically made for concrete or brick, because a standard bit won’t perform well.

Shank Type and Compatibility

I always check whether the shank fits my drill. Some of my drills work best with round shanks, while others need hex shanks for a firmer grip. I’ve learned that compatibility matters just as much as the bit size. If the shank doesn’t match my drill chuck, the bit won’t perform properly, even if the size is exactly right.

Drilling Accuracy

When I need a precise 12.5 mm hole, I look for a bit with a sharp tip and good centering ability. In my experience, a well-made bit starts cleanly and reduces wandering at the beginning of the cut. This is especially important when I’m working on metal or finished surfaces where accuracy really matters.

Durability and Heat Resistance

I prefer bits that can handle heat without dulling too quickly. During longer drilling jobs, I’ve noticed that lower-quality bits wear out fast or overheat. A durable 12.5 mm drill bit saves me time and money because I don’t have to replace it as often. If I expect heavy use, I choose a stronger coating or a tougher alloy.

Coating and Finish

I also look at the coating on the bit. Coatings like titanium or black oxide can help reduce friction and improve lifespan. From my experience, a good coating makes drilling smoother and helps the bit resist corrosion. While coating doesn’t replace quality material, it does add extra value.

Application Type

I think about how I’ll use the bit before buying it. If I’m doing woodworking, I want a clean-cutting bit. If I’m drilling metal, I need something stronger and more heat-resistant. For home improvement jobs, I usually want an all-around bit that can handle multiple materials. Choosing based on application helps me avoid buying the wrong tool.

Brand Reputation

I trust brands that are known for consistent quality. In my experience, reputable brands usually offer better performance, tighter size accuracy, and longer service life. I don’t always choose the most expensive option, but I do prefer brands with good reviews and a solid track record.

Price vs Value

I compare price with performance rather than just picking the cheapest option. A low-cost drill bit may seem attractive, but if it dulls quickly, it ends up costing me more in the long run. I look for the best balance between affordability and durability so I get real value from my purchase.

My Final Tip

Before I buy a 12.5 mm drill bit, I always confirm the exact size I need, the material I’m drilling, and the type of drill I’m using. That simple check helps me avoid mistakes and makes sure I get the best results. For me, the right 12.5 mm drill bit is the one that matches my project, my drill, and my expectations for quality.

Final Thoughts

I’ve found that a 12.5 mm drill bit is a versatile tool that can handle a wide range of medium-duty drilling tasks with accuracy and ease. My key takeaway is that choosing the right material, shank type, and application makes a big difference in performance and durability. Whether I’m working on wood, metal, or masonry, using the proper bit helps me get cleaner results and a smoother workflow.