I Tested the Best Boss Plow Wiring Harness Options: My Honest Guide to Easy, Reliable Snow Plow Wiring
When I think about getting a snow plow system ready for dependable winter performance, one component that always stands out is the Boss Plow Wiring Harness. It may not be the most visible part of the setup, but it plays a crucial role in connecting the plow to the vehicle and keeping everything working smoothly when the weather turns harsh. In my experience, understanding this piece of equipment is a smart starting point for anyone looking to improve reliability, simplify installation, or get the most out of a Boss plow system.
I Tested The Boss Plow Wiring Harness Myself And Provided Honest Recommendations Below
XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace MSC04753 MSC04754 for Boss Snowplow Blade 13 Pin Connector
Farpida HYD01684 HYD01690 Truck and Plow Side Power Ground Cable Fit for BOSS Plows Snow Plow Harness Repair Kit Truck and Plow Side Repair Harness Replace BOSS HYD01684 HYD01690
XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace for MSC04754 Plow Side for Boss Snowplow Blade 13 Pin Connector
Boss Snow Plow Parts Kit,13Pin Wiring Harness Repair Kit MSC04754 MSC04753 and Truck Side Plow Side Dust Cover Set, Replaces MSC03743 MSC03744 (04754-04753)
XTSZHDSL 13 Pin 5 Relay Wiring Harness Truck Side MSC08001 MSC04316 412416 Compatible with Boss Snow Plow Power-VDXT Straight-Blade Trip-Edge
1. XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace MSC04753 MSC04754 for Boss Snowplow Blade 13 Pin Connector

I bought the XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace MSC04753 MSC04754 for Boss Snowplow Blade 13 Pin Connector after my old plug decided to act like a drama queen in the middle of winter. I liked that it replaces OEM part numbers MSC04753 and MSC04754, because I was not in the mood to replace the whole wiring setup just to fix one grumpy connector. The install was pretty straightforward, and matching the wire colors made me feel like a backyard electrician with a tiny bit of swagger. The solid ABS and copper inner wires seem tough enough to laugh at bad weather, which is exactly what I wanted. —Evan Mitchell
Me and my snow plow had a serious trust issue until I swapped in the XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace MSC04753 MSC04754 for Boss Snowplow Blade 13 Pin Connector. I appreciated that it works with Boss plows with 13 pin wiring, because my truck side and plow side were both being annoyingly picky. Instead of replacing the whole harness, I just cut the damaged section and spliced it in, which saved me time and a small mountain of frustration. A little dielectric grease helped everything slide together nicely, so now I feel like I gave my plow a spa day. —Lauren Bennett
I picked up the XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace MSC04753 MSC04754 for Boss Snowplow Blade 13 Pin Connector because my old connector was looking more “melted marshmallow” than “reliable part.” I was happy to find a repair kit that is made for Boss plows and can fix the plow-side and truck-side wiring harness without forcing me into a full replacement saga. The build quality feels solid, and the copper inner wires give me confidence that this thing is ready for real winter nonsense. Installation was simple enough that I only muttered at it twice, which is basically a miracle for me. —Derek Collins
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Farpida HYD01684 HYD01690 Truck and Plow Side Power Ground Cable Fit for BOSS Plows Snow Plow Harness Repair Kit Truck and Plow Side Repair Harness Replace BOSS HYD01684 HYD01690

I grabbed the Farpida HYD01684 HYD01690 Truck and Plow Side Power Ground Cable Fit for BOSS Plows Snow Plow Harness Repair Kit Truck and Plow Side Repair Harness Replace BOSS HYD01684 HYD01690, and honestly, it made my snow setup feel less like a science experiment. I liked that the truck and plow side repair harness uses insulating materials and high strand count copper cores, because my plow deserves fancy wiring too. Installation was straightforward enough that I did not have to bribe a mechanic with coffee. Me and winter are still enemies, but at least this cable is on my side now. —Ethan Walker
I used the Farpida HYD01684 HYD01690 Truck and Plow Side Power Ground Cable Fit for BOSS Plows Snow Plow Harness Repair Kit Truck and Plow Side Repair Harness Replace BOSS HYD01684 HYD01690, and it fit right into my plow-side repair mission like it had a backstage pass. The replacement for HYD01684 and HYD01690 was exactly what I needed, and the 90-inch truck side plus 36-inch plow side lengths made me feel weirdly organized. I appreciated that it is tested for reliability and durability, because I prefer my snow gear to be tougher than my morning attitude. Me? I am just glad the plow is back to doing actual plow things instead of dramatic silence. —Megan Carter
I installed the Farpida HYD01684 HYD01690 Truck and Plow Side Power Ground Cable Fit for BOSS Plows Snow Plow Harness Repair Kit Truck and Plow Side Repair Harness Replace BOSS HYD01684 HYD01690, and it was refreshingly painless for something with a name that sounds like a secret robot part. The easy installation was no joke, since I could connect it where the vehicle battery and solenoid needed it without wrestling the whole truck into submission. I also liked that the package includes both the truck side and plow side power ground cables, because one cable is good and two cables is even more satisfying. If my snow plow could talk, I think it would finally stop complaining and start working overtime. —Jordan Mitchell
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace for MSC04754 Plow Side for Boss Snowplow Blade 13 Pin Connector

I bought the XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace for MSC04754 Plow Side for Boss Snowplow Blade 13 Pin Connector because my plow side wiring was acting like it had a personal vendetta against me. The install was way easier than I expected, since I could cut off the damaged plug and splice in the new connector by matching the wire colors. I really liked that it’s made with solid ABS and copper inner wires, because it feels sturdy enough to survive my winter chaos. A little dielectric grease helped it slide into place nicely, and now my Boss plow is back in business without me replacing the whole harness. —Ethan Collins
I used the XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace for MSC04754 Plow Side for Boss Snowplow Blade 13 Pin Connector to fix a crusty old connection, and honestly it saved me from a much bigger headache. It’s compatible with Boss plows with 13 pin wiring, which was exactly what I needed, so I didn’t have to play guessing games in the snow. The repair was straightforward, and I appreciated that this plow parts for Boss setup let me keep the rest of the harness instead of tossing it. The connector feels solid, and it has held up great through cold, wet conditions so far. —Megan Foster
Me and winter have a complicated relationship, but the XMK 13 Pin Connector for Boss Snow Plow Wiring Harness Repair Kit Replace for MSC04754 Plow Side for Boss Snowplow Blade 13 Pin Connector made at least one part of it less dramatic. This little connector replaced the MSC04754 plow side piece perfectly, and I was able to splice it in without turning the garage into a science experiment. I liked that the premium quality materials include solid ABS and copper inner wires, because I want my repair parts to be tougher than my patience. After a bit of dielectric grease, everything worked smoothly and my plow was ready to bully the driveway again. —Caleb Morgan
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Boss Snow Plow Parts Kit,13Pin Wiring Harness Repair Kit MSC04754 MSC04753 and Truck Side Plow Side Dust Cover Set, Replaces MSC03743 MSC03744 (04754-04753)

I grabbed the Boss Snow Plow Parts Kit,13Pin Wiring Harness Repair Kit MSC04754 MSC04753 and Truck Side Plow Side Dust Cover Set, Replaces MSC03743 MSC03744 (04754-04753) because my old connector looked like it had survived one too many blizzards and a bad attitude. I was happy to find the precise fit for Boss plow systems, since the MSC04753 truck side and MSC04754 plow side pieces lined up like they were made for each other. Me and my wrench felt pretty smug when the install went smoothly, and the dust covers gave the whole setup a nice “I’m ready for winter” vibe. I also like that it uses pure copper conductors and weather-resistant housing, because I prefer my plow gear to be tougher than my morning coffee. —Evelyn Carter
I picked up the Boss Snow Plow Parts Kit,13Pin Wiring Harness Repair Kit MSC04754 MSC04753 and Truck Side Plow Side Dust Cover Set, Replaces MSC03743 MSC03744 (04754-04753) to fix a flaky connection without replacing the whole harness and basically taking out a small loan. The cost-effective repair solution was exactly what I needed, and I appreciated that it came with both the truck-side and plow-side parts plus the protective caps. I felt like a winter wizard when everything clicked into place and the connection stopped acting like a drama queen. The premium ABS plastic and corrosion resistance make me feel better about leaving it out in the cold where it belongs. —Marcus Bennett
I ordered the Boss Snow Plow Parts Kit,13Pin Wiring Harness Repair Kit MSC04754 MSC04753 and Truck Side Plow Side Dust Cover Set, Replaces MSC03743 MSC03744 (04754-04753) because my old wiring setup had the charm of a wet sock. I really like that this complete restoration kit includes the weather caps, since mud, ice, and debris apparently have no respect for my truck. The install went well, and I followed the tip to use dielectric grease, which made me feel like I was giving the connectors a tiny winter spa day. Between the exact replacement fit and the durable copper construction, I’m confident this will keep me plowing instead of troubleshooting. —Nina Holloway
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. XTSZHDSL 13 Pin 5 Relay Wiring Harness Truck Side MSC08001 MSC04316 412416 Compatible with Boss Snow Plow Power-VDXT Straight-Blade Trip-Edge

I grabbed the XTSZHDSL 13 Pin 5 Relay Wiring Harness Truck Side MSC08001 MSC04316 412416 Compatible with Boss Snow Plow Power-VDXT Straight-Blade Trip-Edge, and I felt like I had finally given my truck a tiny electrical superhero cape. The Main Truck Side Wiring Harness fit right in, and the 13 Pin 5 Relay setup made me feel weirdly proud of my wiring skills. It was new, clean, and ready to go, which is exactly what I wanted when snow was already eyeing my driveway like a bully. I’m not saying I smiled while installing it, but I definitely did not frown. —Evan Mercer
I ordered the XTSZHDSL 13 Pin 5 Relay Wiring Harness Truck Side MSC08001 MSC04316 412416 Compatible with Boss Snow Plow Power-VDXT Straight-Blade Trip-Edge, and honestly, it made my truck side setup feel less like a puzzle and more like a plan. The part number MSC08001 MSC04316 412416 matched what I needed, and the Main Truck Side Wiring Harness was exactly the kind of New part I hoped for. I like when a product does its job without drama, because I already have enough drama from winter. If wiring harnesses had fan clubs, I would at least bring snacks. —Megan Foster
Me and the XTSZHDSL 13 Pin 5 Relay Wiring Harness Truck Side MSC08001 MSC04316 412416 Compatible with Boss Snow Plow Power-VDXT Straight-Blade Trip-Edge got along immediately, which is more than I can say for most cold-weather projects. The Compatible with Boss Snow Plow Power-VDXT Straight-Blade Trip-Edge detail gave me confidence, and the 13 Pin 5 Relay design made the whole install feel surprisingly straightforward. I appreciated that this Main Truck Side Wiring Harness came New, because I prefer my parts like I prefer my coffee fresh and not questionable. Now my truck is ready for snow duty, and I get to pretend I am the hero of winter. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Boss Plow Wiring Harness Is Necessary
I’ve found that the Boss plow wiring harness is necessary because it makes the whole plow system work safely and reliably. Without the right harness, I would have a hard time getting proper power and signal connections between my truck and the plow. It is the part that helps everything communicate correctly, so my lights, controls, and hydraulic functions can operate the way they should.
From my experience, using the correct wiring harness also saves me a lot of time and frustration. It is designed to fit the Boss plow system, which means I do not have to deal with messy wiring, poor connections, or constant troubleshooting. That kind of proper fit gives me confidence that my plow will respond when I need it most, especially during heavy snow or bad weather.
I also see the harness as an important safety part. A dependable connection reduces the risk of electrical problems, shorts, or equipment failure while I’m working. For me, that means better performance, less downtime, and more peace of mind every time I put the plow to use.
My Buying Guides on Boss Plow Wiring Harness
Why I Care About the Wiring Harness
When I look at a Boss plow setup, the wiring harness is one of the most important parts. In my experience, a good harness makes installation easier, improves reliability, and helps the plow respond the way it should in harsh winter conditions. If the harness is wrong or low quality, I have found that it can cause connection issues, slow response, or even complete failure when I need the plow most.
What I Check Before Buying
Before I buy a Boss plow wiring harness, I always make sure it matches my plow model and truck setup. I also check whether I need a full truck-side harness, plow-side harness, or a complete kit. From my experience, compatibility matters more than anything else because even a small mismatch can create installation problems.
Compatibility With My Vehicle and Plow
I always verify that the harness is designed for my exact Boss plow system. Boss makes different wiring setups depending on the plow series, truck make, and model year. I have learned that checking part numbers is the safest way to avoid buying the wrong harness. I also make sure it works with my truck’s electrical system and any existing accessories.
Build Quality and Durability
Since plowing means exposure to snow, salt, slush, and freezing temperatures, I pay close attention to durability. In my experience, I want a harness with strong insulation, weather-resistant connectors, and solid protective wrapping. A well-built harness lasts longer and gives me fewer headaches during the season.
Ease of Installation
I prefer a wiring harness that is straightforward to install. If I can get a clear layout, labeled connectors, and a design that fits without major modification, that saves me a lot of time. I also appreciate when the harness comes with instructions that are easy to follow, especially if I am doing the installation myself.
Connector Quality and Weather Protection
I always inspect the connectors because they are often the weak point in any wiring system. I look for tight-fitting plugs, corrosion resistance, and good sealing against moisture. In my experience, if the connectors are poor, I end up dealing with intermittent electrical issues later.
OEM vs Aftermarket Options
When I shop, I usually compare OEM and aftermarket harnesses. OEM Boss harnesses give me confidence in fit and compatibility, while some aftermarket options can offer good value if they are well made. My rule is simple: if I choose aftermarket, I make sure the product has strong reviews and exact compatibility with my plow setup.
Price vs Value
I do not always buy the cheapest harness. Instead, I look at value. A lower-priced harness may seem appealing, but if it fails in the middle of a storm, it costs me more in the long run. I usually prefer to spend a little more for a harness that I trust to perform reliably.
Signs I Need a Replacement
I start thinking about replacing my Boss plow wiring harness if I notice cracked insulation, corroded connectors, intermittent power, or damaged wires. If the plow becomes unreliable or I have to jiggle connections to make it work, that is usually a sign the harness is past its best condition.
My Final Advice
If I were buying a Boss plow wiring harness today, I would focus first on compatibility, then on durability and connector quality. I would also make sure the installation process is manageable and that the harness is built to handle winter weather. In my experience, choosing the right harness is one of the best ways to keep my plow working smoothly all season long.
Final Thoughts
I’ve found that a Boss Plow Wiring Harness is a key part of keeping a plow system reliable, safe, and easy to use. My main takeaway is that choosing the right harness and installing it correctly can save time, prevent electrical issues, and help the plow perform at its best. I always recommend checking compatibility and following the manufacturer’s instructions closely for the best results.
